Korflame — Fireplace & Outdoor Kitchen

Water vapour fireplaces

A realistic, three-dimensional flame made of lit water mist: no chimney, no gas, no fuel. Our Kormist range and 3D electric fireplaces come in widths from 70 to 180 cm, ready to build into a wall or a piece of furniture.

Installation sizes

Kormist is made to be built into a wall, a cabinet or a piece of furniture, or placed in a mantel. The opening is prepared to the installation size of the model; the table gives both sizes for every width, and the Kormist page has a data sheet for each version.

ModelDimensionsInstallation size
Kormist 70 cm70 × 22 × 13 cm68 × 21 × 13 cm
Kormist 100 cm100 × 22 × 13 cm98 × 21 × 13 cm
Kormist 130 cm130 × 22 × 13 cm128 × 21 × 13 cm
Kormist 150 cm150 × 22 × 13 cm148 × 21 × 13 cm
Kormist 180 cm180 × 22 × 13 cm178 × 21 × 13 cm

For the 3D electric fireplace (70, 100 and 150 cm), take the dimensions from the appliance itself before the opening is built, or ask us for them.

How is a water vapour fireplace built in?

  1. Prepare the opening to the installation size in the table. No chimney, gas connection or flue is needed.
  2. Place the appliance level. If it is tilted, it can leak water or give an uneven flame effect.
  3. Plan a socket nearby. The plug must stay accessible after installation, so that the appliance can be disconnected.
  4. Keep the top open: the mist has to rise freely, and the water tank must stay reachable for filling and cleaning.
  5. Do not build it in directly below a television, a shelf or another electrical device, as the mist can condense on surfaces above it.
  6. Use it indoors only, and not in bathrooms or close to a bath, shower or swimming pool.

Follow local building and electrical regulations. The full steps, with water and care instructions, are in the user manual (PDF).

For specifications, our page for architects and interior designers shows where to find dimensions and data sheets; for hotels and restaurants, see hotel and hospitality projects. Tell us the sizes and quantities, and we will tell you what is possible.

Models

2 models

How a water vapour fireplace works

Water from the built-in tank is turned into a fine mist, which rises through the log set and is lit from below. The result looks like smoke and flame moving in three dimensions, while the mist itself stays cool.

Because there is no combustion, a water vapour fireplace needs no flue, no gas connection and no ventilation for fumes. It plugs into a standard socket.

Where they are used

Hotels, restaurants, bars, shops and apartments where an open flame is not allowed or a chimney is not possible. The cool mist makes them a common choice for public spaces and homes with children.

Kormist models are built to EN IEC 60335-2-30 and Regulation (EU) 2015/1188 and carry the CE mark.

For distributors and projects

Kormist is available in 70, 100, 130, 150 and 180 cm; the 3D electric fireplace in 70, 100 and 150 cm. We supply distributors and retailers, and quote project quantities for hotels and developments. OEM and private label are available.

Frequently asked questions

Does a water vapour fireplace give off heat?

The flame effect itself is cool mist. If you need heat as well, our Korcam and Kormet electric inserts are available with a built-in heater (the "S" models).

Does it need a chimney or ventilation?

No. Nothing burns, so there are no fumes to remove. It needs a power socket and a water supply for its tank.

Which sizes are available?

Kormist: 70, 100, 130, 150 and 180 cm wide. 3D electric fireplace: 70, 100 and 150 cm.

Are they certified for the European market?

Kormist fireplaces are built to EN IEC 60335-2-30 and Regulation (EU) 2015/1188 and are CE marked. Test reports are available on request.

Trade prices, samples and lead times

Tell us your market and quantities and we reply by email with prices and the catalogue.